42
en
Transportation lock
●
To avoid damage caused by frost during
transport and storage, the appliance must
be completely emptied first.
Info:
The appliance must be ready for use
and the water tank
11
filled.
●
Press the
start
button
8
. The appliance
automatically empties the pipe system
and switches off.
●
Empty the water tank
11
and the drip
tray
23
.
Factory reset
You can cancel your own settings and reset
the factory settings.
●
To activate the factory settings, press the
start
button
8
.
Info:
The appliance can also be reset to
the factory settings using a combination of
buttons. The appliance must be switched
off fully.
●
Hold down the selection buttons
<
and
>
4
and the on/off switch
1 O / I
at the
same time for at least 5 seconds. Press
the
start
button
8
. The factory settings
are now reactivated.
Preparation using
coffee beans
This fully automatic espresso machine
grinds beans freshly for each brew. If pos-
sible, use only beans for fully automatic
coffee and espresso machines. For optimal
quality, deep-freeze the beans or store in
a cool place in sealed containers. Coffee
beans can be ground while frozen.
Important:
Fill the water tank
11
with cold,
fresh water every day. The water tank
11
should always contain sufficient water for
operating the appliance.
Tip:
Pre-warm cups, especially small, thick
espresso cups, on the cup warmer
27
.
Different coffee drinks can be prepared
quite simply at the press of a button.
Note:
With some settings, the coffee is
prepared in two stages (see
“ aromaDouble Shot”). Wait until the
procedure is fully completed.
Drink preparation without milk
The appliance must be ready for use.
●
Place the pre-warmed cup(s) under the
coffee outlet
9
.
●
Select the required
2
x Espresso,
2 x Coffee, Espresso
or
Coffee
by turning
the rotary knob
6
.
The display
5
shows the selected drink
along with the setting for coffee strength
and per-cup quantity for this drink.
Espresso
You can change the settings (see “Display
settings”) or call up and customise settings
(see “Customising”).
