Siemens T110 Operation Manual Download Page 4

and remove the lid. Unclip the old
battery from the holder and replace with
the new battery. Replace the lid.

CAUTION: Do not attempt to

change

 

the battery in

a hazardous area.

Spare Parts List

Battery:

Radio Shack Catalog
No. 23-126 (or
equivalent)

Lamp:

SC 125-005-410

Extension
poles:

18 AWG anodized
aluminum 4 foot 4
inches in length S/C
120-057-004

Battery Change

The battery in the T110 should be
changed whenever the indicator lights
described in 

Battery Indicator 

above

signal a low or nonexistent voltage.

CAUTION: Do not use alkaline
batteries in

 

the T110 Test Source.

Nickel cadmium batteries are recom-
mended in preference to zinc carbon
batteries because of their longer life
(See 

Battery Life 

in 

TECHNICAL

DATA 

above), and only nickel cadmium

batteries are permitted by BASEEFA for
hazardous areas.

Insert the new battery only when in a
safe area. Remove the four corner
screws on the front cover of the module

P/N 315-089116-2

Siemens Building Technologies, Inc.
8 Fernwood Road
Florham Park, New Jersey 07932

Siemens Building Technologies, Ltd.
2185 Derry Road West
Mississauga, Ontario L5N 7A6 Canada

Summary of Contents for T110

Page 1: ... Manual ModelT110 InfraredTest Source P N 315 089116 2 Siemens BuildingTechnologies Inc 8 Fernwood Road Florham Park New Jersey 07932 Siemens BuildingTechnologies Ltd 2185 Derry Road West Mississauga Ontario L5N 7A6 Canada ...

Page 2: ...or such use may be obtained on a site by site basis The Test Source has a polycarbonate housing approved for increased safety It contains a lamp that is electrically pulsed by an intrinsically safe circuit Infrared energy from the lamp is focused on the detector through a Fresnel lens The unit is powered by either a carbon zinc or nickel cadmium battery The large rotary switch knob on the front of...

Page 3: ... that the Test Source unit is working normally A flashing red LED indicates low battery voltage a steady red LED indicates extremely low battery voltage If both the white light and the red LED are off the battery is presumed to be dead OPERATION If the detector to be checked is out of reach fasten as many poles as neces sary up to three to reach the detector Select the correct rotary switch settin...

Page 4: ...attery Indicator above signal a low or nonexistent voltage CAUTION Do not use alkaline batteries in the T110 Test Source Nickel cadmium batteries are recom mended in preference to zinc carbon batteries because of their longer life See Battery Life in TECHNICAL DATA above and only nickel cadmium batteries are permitted by BASEEFA for hazardous areas Insert the new battery only when in a safe area R...

Reviews: