Siemens SXG75, User Manual

Page: 34 / 175

Calling 34
© Siemens AG 2003, E:\Auftrag\Siemens\M
obilePhones\FCCs\sxg75\FUG\WOLF5_Phone.fm
left page (34)
of SXG75, FUG us-en, A31008-H8900-A1-1-7619 (07.10.2005, 13:41)
Template: X75, Version 2.2;VAR La
nguage:
en;
VAR issue date: 050902
Calling
With your phone you can make con-
ventional (voice) calls as well as vid-
eo calls. However, it is not possible
to make a voice call and a video call
at the same time.
Video calls
To initiate a video call
(in standby mode):
C
¢
¥
The phone switches to
video call mode. A pre-
view is displayed. You can
enter a number (see Dial-
ling with number keys).
Or
J
Enter the number (always
with prefix/international
dialling code).
j
Press the video call key.
The phone switches to
video call mode.
You can also decide to make a video
call after you have already entered a
number or selected a number from a
call list.
Dialling with number
keys
The phone must be switched on
(standby mode).
J Enter the number (always
with prefix/international
dialling code).
A
Press the Call key.
Or
C
Press.
Or
j
Press the video call key to
make a video call.
The displayed number is dialled.
Ending a call
B
Press the End key briefly .
Press this key even if the
person on the other end
of the line has hung up
first.
Prerequisite
The called party as well as the network
have to be capable of handling video calls.
If you are calling a number that does not
meet these requirements you will be of-
fered the option of making a voice call
instead.