Siemens SX85Z801BE, Information For Use

Page: 41 / 60

Home Connect
en
41
Basic setting Display text Selection Description
Remote Start rc:01 rc:00 - rc:02 Activate or deactivate
→
"Remote Start ",
Page 42 .
The following settings are
possible:
¡
With the setting "rc:00",
the function is perman-
ently deactivated.
¡
With the setting "rc:01",
the function can be selec-
ted via the button.
→
"Activating Remote
Start ", Page 42
¡
With the setting "rc:02",
the function is perman-
ently activated.
This basic setting is not
available until after you have
connected the device with
the Home Connect app.
→
"Home Connect ",
Page 41
Factory setting rE: Start with
Y:ES
Confirm with Restore changed settings to
the factory settings.
The settings for initial start-
up must be configured.
1
Factory setting (may vary according to model)
16.2 Changing basic settings
1.
Open the appliance door.
2.
Press ⁠.
3.
To open the basic settings, press
for 3 seconds.
a
The display shows H:xx.
a
The display shows ⁠.
4.
Press repeatedly until
the display shows the required set-
ting.
5.
Press or repeatedly until the
display shows the right value.
You can change several settings.
6.
To save the settings, press
for 3 seconds.
7.
Close the appliance door.
Home Connect
17 Home Connect
Home Connect
This appliance is network-capable.
Connect your appliance to a mobile
device to control its functions via the
Home Connect app.
The Home Connect services are not
available in every country. The avail-
ability of the Home Connect function
depends on the availability of
Home Connect services in your coun-
try. You can find information about
this at: www.home-connect.com.