background image

en 

Water softening system

26

Water hardness °E

Hardness range

mmol/l

Setting value

0 - 8

Soft

0 - 1.1

H:00

9 - 10

Soft

1.2 - 1.4

H:01

11 - 12

Medium

1.5 - 1.8

H:02

13 - 15

Medium

1.9 - 2.1

H:03

16 - 20

Medium

2.2 - 2.9

H:04

21 - 26

Hard

3.0 - 3.7

H:05

27 - 38

Hard

3.8 - 5.4

H:06

39 - 62

Hard

5.5 - 8.9

H:07

Note: 

Set the water hardness determ-

ined on your appliance. 
→ 

"Setting the water softening sys-

tem", Page 26

With a water hardness of 0 - 8 °E
you can dispense with special salt for
dishwashers and switch off the water
softening system. 
→ 

"Switching off the water softening

system", Page 27

Setting the water softening
system

Set the water hardness on your appli-
ance.

1.

Determine the water hardness and
the appropriate setting value. 
→ 

"Overview of water hardness set-

tings", Page 25

2.

Press  ⁠.

3.

To open the basic settings, press

 for 3 seconds.

a

The display shows H:xx.

a

The display shows 

⁠.

4.

Press   or   repeatedly until the
right water hardness has been set.
The value H:04 is set at the fact-
ory.

5.

To save the settings, press

 for 3 seconds.

Special salt

You can use special salt to soften
water.

Adding special salt

If the special salt refill indicator lights
up, add special salt to the dispenser
for special salt just before the pro-
gramme starts. The consumption of
special salt depends on the water
hardness. The higher the water hard-
ness, the greater the consumption of
special salt.

ATTENTION!

¡

Detergent may damage the water
softening system.

Only fill the dispenser of the wa-
ter softening system with special
dishwasher salt.

¡

Special salt for dishwashers can
damage the tub due to corrosion.

To make sure that any special
salt that escapes is washed out
of the tub, add the special salt
to the dispenser for special salt
immediately before the pro-
gramme starts.

1.

Unscrew the lid of the dispenser
for special salt and remove.

2.

On initial start-up: Fill the dispenser
right up with water.

Summary of Contents for SX85E800BE





































































Reviews: