Siemens SX763 Manual Download Page 53

Page: 53 / 162

Configuring Advanced Settings

Gigaset SX763 WLAN dsl / en AnnA / A31008-M707-R131-1-7619 / configure_router.fm / 20.07.2006

hablone 2

005_0

7_2

Internet

If you have configured the Gigaset SX763 WLAN dsl using the two wizards, you have
also configured the

WAN

connection (Internet access). You can check or change these

settings in the

Internet

menu.

This menu also offers you a wide range of possibilities for setting up security settings
and limiting access to the Internet as well as for providing your own services on the
Internet.
You can carry out the following via the

Internet

menu:

Activate/deactivate the Internet connection and edit the virtual connection param-
eters (for further information see below),

check and edit the Internet connection of the Gigaset SX763 WLAN dsl (for further
information see below),

enter the PC's registered MAC address for Internet access (WAN interface, see
page 61),

Make DNS server settings (page 60),

protect the network against unauthorised external access (firewall),

provide your own services on the Internet (NAT, see page 66),

Set up dynamic DNS (page 72),

set up routing for your Internet connection services (page 71),

define QoS properties (properties for data transfer, see page 73).

Summary of Contents for SX763



































































































































































Search results

Summary of Contents for SX763

Reviews:

Related manuals for SX763

Brands by name

Popular brands

Siemens SX763, Manual

Search results

Summary of Contents for SX763

Reviews:

Related manuals for SX763

Brands by name

Popular brands