NLSet up and connect
†Dishwasher
†Instructions
†Assembly instructions
†Other documents containing information
tie
†mounting material
†Steam protection plate †
Salt filling aid funnel
†Power cord
†Quick guide
Waste water connection
Connect the appliance to a waste water
connection so that the contaminated
washing water can be drained.
Install waste water connection
1.
The necessary steps can be found in
the supplied installation instructions.
2.
Connect the drain hose to the
connection nipple of the siphon
using the supplied parts.
Set up and connect the
device
You can install your under-counter or
built-in appliance in the kitchen unit
between wooden and plastic walls. If
you subsequently install the appliance
as a free-standing appliance, you must
secure the appliance against tipping
over, e.g. by screwing it to the wall or
installing it under a continuous
worktop that is firmly connected to the
adjacent cupboards.
3.
Make sure that the drain hose is not
kinked, crushed or tangled.
4.
Make sure that the water does not
flow out by a sealing cap in the
waste water connection.
Drinking water connection
Connect the device to a drinking
water connection.
1. "
Observe the safety instructions."
Install drinking water connection
Remark
†When you replace the device,
you can use a new water supply
hose.
2. "
Observe the instructions for the
3.
Check the contents of the package
and the condition of the device.
1.
The necessary steps can be found in
the supplied installation instructions.
4.
The required installation dimensions can be found
in the installation instructions.
2.
Connect the device to the drinking
water connection using the
enclosed parts.
5.
Level the appliance using the
adjustable feet.
Pay attention to a firm position.
3.
Make sure that the drinking water
connection is not kinked, crushed
or entangled.
6. "
Install the waste water connection."
7. "
Page 14
8.
Connect the device to the
power.
14
Summary of Contents for SX67ZX02CE
Page 67: ......
