Diagnosis of Ethernet EN100 Module
EN100 Information in PowerSys
If an Ethernet module EN100 for IEC61850 is configured with the SWT 3000, the PowerSys menu SWT 3000 >
Information > EN100 Info displays the most important information about addresses and connection status of
the module.
The EN100 information can only be read when the PowerSys program is connected to the device (stand-alone
SWT 3000 or integrated SWT 3000 in PowerLink).
[scen100i-260313-01.tif, 1, en_US]
Figure 4-14
SWT 3000 > Information > EN100 Info
The following EN100 information is displayed:
Table 4-12
EN 100 Information
Line/IDX
Information
IDX 1
CRC value (EN100 BIN parameter file checksum)
IDX 2
Module type
IDX 3
Hardware address (MAC)
IDX 4, IDX 5, IDX 6
Ethernet channel adresses: IP address, Network mask, Gateway address
4.7
Diagnostics and Error Handling
4.7 Diagnosis of Ethernet EN100 Module
Smart Communication, SWT 3000 Teleprotection, Equipment Manual
195
C53000-G6040-C605-1, Edition 03.2020
