Installation and connection
en
13
2.
Connect the wastewater hose to
the outlet connection of the siphon
using the enclosed parts.
3.
When doing so, check that the
wastewater hose is not kinked,
crushed or twisted.
4.
Also check that there is no cover
in the drainage system preventing
the wastewater from being dis-
charged.
Drinking water connection
Connect your appliance to a drinking
water connection.
Installing the drinking water
connection
Note
¡
If you are replacing the appliance,
you must use a new water supply
hose.
1.
Consult the installation instructions
supplied for the steps required
here.
2.
Connect the appliance to the drink-
ing water connection using the en-
closed parts.
Observe the "Technical data"
→
3.
When doing so, check that the
drinking water connection is not
kinked, crushed or twisted.
Electrical connection
Connecting the appliance to the
electricity supply
Notes
¡
Please follow the "Safety instruc-
tions" →
.
¡
Connect the appliance to alternat-
ing current only, in the range of
220 - 240 V and 50 Hz or 60 Hz.
¡
Please note that the water safety
system is only functional if there is
a power supply.
1.
Insert the non-heating appliance
plug of the power cable into the
appliance.
2.
Insert the mains plug of the appli-
ance into a nearby socket.
The connection data for the appli-
ance can be found on the rating
plate.
3.
Check that the mains plug is inser-
ted properly.
