Siemens SR45ZS09MS User Manual Download

Page: 6 / 60

Safety

WARNING ‒ Risk of electric shock!

Cutting through the supply hose or immersing the Aqua-Stop
valve in water is dangerous.

▶

Never immerse the plastic housing in water. The plastic
housing on the supply hose contains an electric valve.

▶

Never cut through the supply hose. The supply hose con-
tains electric power cables.

WARNING ‒ Risk of injury!

Hinges move when opening and closing the appliance door
and can cause injury.

▶

If built-under or integrable appliances are not in a cavity so
that one side is accessible, the hinge area must be covered
at the side. Covers are available from Customer Service or
specialist outlets.

WARNING ‒ Risk of tipping!

Improper installation may cause the appliance to tip up.

▶

Only install built-under or integrable appliances under a
continuous worktop that is securely connected to adjacent
cabinets.

Safe use

Follow these safety instructions when using the appliance.

WARNING ‒ Risk of serious harm to health!

Failure to comply with safety instructions and directions for
use on packagings of detergent and rinse aid products may
cause serious harm to health.

▶

Follow the safety instructions and directions for use on the
packagings of detergent and rinse aid products.

WARNING ‒ Risk of explosion!

Adding solvents to the interior of the appliance may cause ex-
plosions.

▶

Never add solvents to the interior of the appliance.

Summary of Contents for SR45ZS09MS





























































Search results

Summary of Contents for SR45ZS09MS

Reviews:

Related manuals for SR45ZS09MS

Brands by name

Popular brands

Siemens SR45ZS09MS, User Manual

Search results

Summary of Contents for SR45ZS09MS

Reviews:

Related manuals for SR45ZS09MS

Brands by name

Popular brands