3
Step 3. Install filters on your phone jacks
3-1. Locate the phone jack where you wish to install your DSL.
A. Plug one end of a supplied
Splitter Filter (E)
into the phone jack, as shown in the image below. There
should be a port labeled
DSL
and one labeled
Phone
on the other end of the splitter filter. Plug one end of
the supplied
Phone Cable (D)
into the
DSL
port on the splitter filter and the other end into port labeled
DSL
on the supplied
SpeedStream DSL Modem (A)
.
B. If you have a phone, fax machine or any other telephony device at this location, plug the telephone
device into the
Phone
port of the
DSL Splitter Filter
.
3-2. Install filters for all other telephones or devices.
All other equipment on the phone line must have filters installed. This applies to equipment such as
telephone answering machines, Caller ID units, analog computer modems, fax machines, alarm systems,
etc. Use one of the supplied splitter filters for each piece of equipment plugged into the phone line. Make
sure you connect each of these devices to the splitter filter port labeled
Phone
.
