Page
8
Document Number: 0072
Rev. 09
CONTROLLED COPY
Figure 3
– Packaging
5.1 LIFTING OF JUMPERS & CONNECTORS
SpecTRON 5 harnesses typically weigh in excess of 30 kg and hence should not be manually
handled. Refer to the specific harness drawing for weight and length details. The connectors can be
safely slung around the locations shown in Figure 4 and Figure 5. The centre of gravity for the
Connector or Penetrator is usually marked on the outline drawing (supplied in documentation pack)
but must be verified at low level before commencing any lift.
For SPO or API flange penetrators, lifting eye mounting holes are provided on the flange at 12 and 6
o’clock positions.
ROV Receptacle
ROV Plug
Figure 4 - Recommended lift positions
– Plug & Receptacle
Sling around each side of the
Receptacle Flange
Do not sling around
handle as this may
release protective cap
Sling around Plug
Rear Shell
between handle
bars
Summary of Contents for SpecTRON 5
Page 1: ......
