To review stored images/studies
1
Press Patient Browser key on the control panel.
2
Use TRACKBALL position cursor on patient name, press SET key.
3
Roll trackball to select Image Screen button-press SET key.
To change display format
1
Roll cursor to top left drop down menu.
2
Position cursor over arrow, press SET key.
3
Select desired format (1X1, 2X2, 3X3, 4X4 or 5X5) and release SET key.
4
To advance images rotate SELECT knob.
To select multiple consecutive studies
1
Select a single study.
2
Place cursor on last patient name.
3
Press Shift key and SET key.
To select multiple nonconsecutive studies
1
Position cursor and hold Ctrl key for additional studies, press SET key.
Transfer Studies to CD
Press Patient Browser key on the control panel.
1
Select EJECT button from menu-Insert CD.
2
Select LOAD from patient browser menu-press SET key.
3
Use TRACKBALL position cursor on patient name, press SET key.
4
Wait until highlighted case turns “blue”.
5
Select EXPORT from menu-press SET key.
6
Status of export displayed on bar under export.
7
Select EJECT from menu-press SET key.
8
Remove CD from CD-driver. Press Escape to leave Patient Browser or select Live Screen to Resume Scanning.
Powering off System:
Turn off system by pressing blue power switch located on the upper left side of the keyboard.
* Press once for STANDBY mode
* Press and hold to Power system OFF
Note: Wait until monitor goes black before removing power cord from wall.
Refer to the system’s user and reference manuals for safety information (warnings, cautions, and explanations of symbols and labels),
complete operating instructions and technical specifications, and procedures for system and transducer care (cleaning and disinfecting
procedures).
Siemens reserves the right to change system specifications at any time.