Siemens SN61HX08VE Information For Use Download

Page: 52 / 60

Troubleshooting

Fault

Cause

Troubleshooting

All LEDs lit up or flashing.

Electronics have detected a
fault.

Press the main switch button for ap-
prox. 4 seconds.

→

"Controls", Page 15

The appliance is reset and restar-
ted.

If the problem occurs again:

‒

Switch off the appliance.

‒

Pull out the mains plug or
switch off the fuse in the fuse
box.

‒

Wait at least 2 minutes.

‒

Switch on the fuse in the fuse
box or insert the mains plug.

‒

Switch the appliance on.

If the problem occurs again:

‒

Contact customer service.

→

"Customer Service",

Page 55

Mechanical damage

Fault

Cause

Troubleshooting

Appliance door cannot be
closed.

Door lock has been activ-
ated.

▶

Close the appliance door with
greater force.

Door cannot be closed due
to installation method.

▶

Check whether the appliance has
been installed properly.
When closed, the appliance door,
its decor or attached parts should
not knock against adjacent cabin-
ets or the worktop.

Lid on the detergent dis-
penser cannot be closed.

Detergent dispenser or lid
are blocked by sticky deter-
gent residue.

▶

Remove detergent residue.

Noise

Fault

Cause

Troubleshooting

Filling valves making knock-
ing noises.

Caused by the domestic in-
stallation. No appliance fault
present. Does not affect
functioning of the appliance.

▶

Can only be remedied in the do-
mestic installation.

Knocking or rattling noise.

Spray arm is striking table-
ware.

▶

Arrange tableware so that the spray
arms do not strike tableware.

Summary of Contents for SN61HX08VE





























































Search results

Summary of Contents for SN61HX08VE

Reviews:

Related manuals for SN61HX08VE

Brands by name

Popular brands

Siemens SN61HX08VE, Information For Use

Search results

Summary of Contents for SN61HX08VE

Reviews:

Related manuals for SN61HX08VE

Brands by name

Popular brands