Siemens SN45ZW10CS, User Manual

Page: 36 / 60

en
Basic settings
36
Basic setting Display text Selection Description
EmotionLight E02
1
E00 - E02 Interior light.
¡ With the setting "E00"m the in-
terior light is switched off.
¡
With the setting "E01", the in-
terior light can be activated via
the ON/OFF button.
¡ With the setting "E02", the in-
terior light goes on when you
open the appliance door.
When the appliance door is opened,
the interior lighting switches off auto-
matically after 10 minutes.
Wi-Fi Cn0
1
Cn0 - Cn1 Switch the wireless network connec-
tion on or off.
Level "Cn0" switches the wireless
network connection off.
Remote Start rc1
1
rc0 - rc2 Activate or deactivate
→ "Remote Start ", Page 38 .
The following settings are possible:
¡ With the setting "rc0", the func-
tion is permanently deactivated.
¡ With the setting "rc1", the func-
tion can be selected via the
button.
→
"Activating Remote Start ",
Page 38
¡ With the setting "rc2", the func-
tion is permanently activated.
Factory setting rE Start with
YES
Confirm with Restore changed settings to the fact-
ory settings.
The settings for initial start-up must
be configured.
1
Factory setting (may vary according to model)
Changing basic settings
1.
Press ⁠.
2.
To open the basic settings, press
for 3 seconds.
a The display shows Hxx.
a
The display shows ⁠.
3.
Press repeatedly until
the display shows the required set-
ting.
4.
Press repeatedly until the dis-
play shows the right value.
You can change several settings.
5.
To save the settings, press
for 3 seconds.