NLSet up and connect
secure the device against tipping over,
e.g. by screwing it to the wall or
installing it under a continuous
worktop that is firmly connected to the
adjacent cabinets.
4.
Make sure that the water does not
flow out by a plug in the waste
water connection.
Drinking water connection
1. "
Observe the safety instructions."
Connect the device to a drinking
water connection.
2. "
Observe the instructions for the
Install drinking water connection
Remark
†When you replace the device,
you can use a new water supply
hose.
3.
Check the contents of the package
and the condition of the device.
4.
The required installation dimensions can be found
in the installation instructions.
1.
The necessary steps can be found in
the supplied installation instructions.
5.
Level the appliance using the
adjustable feet.
2.
Connect the device to the drinking
water connection using the
enclosed parts.
Pay attention to a firm position.
6. "
Install the waste water connection."
7. "
Page 14
3.
Make sure that the drinking water
connection is not kinked, crushed
or entangled.
8.
Connect the device to the
power.
Electrical connection
Waste water connection
Connect the device to the mains.
Connect the appliance to a waste water
connection so that the contaminated
washing water can be drained.
Connecting the appliance electrically
Install waste water connection
Comments
†Observe the "Safety
†Only connect the device
on an AC voltage of 220 - 240 V
and 50 Hz or 60 Hz.
†Please note that the wa-
The protection system only works
when the device is supplied with
power.
1.
The necessary steps can be found in
the supplied installation instructions.
2.
Connect the drain hose to the
connection nipple of the siphon
using the supplied parts.
3.
Make sure that the drain hose is not
kinked, crushed or tangled.
1.
Connect the appliance plug of the
connecting cable to the appliance.
14
