background image

Before using for the first time

 en

23

1.

Push the lever forwards   and fold
down the prongs  ⁠.

1

2

2.

To use the prongs again, fold them
back up.

a

The prongs audibly click into posi-
tion.

Basket heights

Set the baskets at the right height.

Appliance height 81.5 cm with cutlery drawer

Setting

Top basket

Bottom basket

1 max. ø

16 cm

31 cm

2 max. ø

18.5 cm

27.5 cm

3 max. ø

21 cm

25 cm

Before using for the first time

Before using for the
first time

Before using for the first time

Configure the settings for initial start-
up.

Performing the initial config-
uration

On initial start-up or after a reset to
the factory settings, you will need to
make settings.

Tip: 

Connect your appliance to a mo-

bile device. You can conveniently
change all settings via the
Home Connect app. 
→ 

"Home Connect quick start",

Page 36

Requirement:

 "The appliance has

been installed and connected."
→ 

Page 13

1.

"Add special salt." → 

Page 24

2.

"Add rinse aid." → 

Page 26

3.

"Switch on the appliance."
→ 

Page 31

4.

"Setting the water softening sys-
tem." → 

Page 24

5.

"Set the amount of rinse aid to be
dispensed." → 

Page 27

Tip: 

You can change these settings

and other "Basic settings"
→ 

Page 34

 at any time.

Summary of Contents for SN43HW33VS





























































Reviews: