en
23
–
Filter in the water supply blocked.
–
Switch off the appliance and pull
out the mains plug.
–
Turn off the tap.
–
Clean filter in the supply hose.
–
Reconnect power supply.
–
Turn on the tap.
–
Switch on the appliance.
–
Water is left in the appliance
at the end of the programme.
–
(
“
:
ƒ…
)
Waste water hose
is blocked or kinked.
Filters blocked.
–
(
“
:
Ġ
)
Waste water pump blocked,
cover on the waste water pump
is not locked in position
(see Waste water pump).
–
Filters blocked.
–
The programme has not yet ended.
Wait until programme ends (digital
display indicates
‹
:
‹‹
) or
implement the “Reset” function.
Error code
“
:
ƒƒ
–
Filters
1Z
are soiled or blocked.
Refill indicator for salt
@
and/or rinse-
aid
H
is not lit.
–
Refill indicator/s switched off.
–
Adequate salt/rinse-aid available.
Refill indicator for special salt
@
is lit.
–
No salt.
Refill with special salt.
–
Sensor does not detect salt tablets.
Use different special salt.
... during the wash cycle
Unusual foam formation.
–
Handwash liquid in the rinse aid
dispenser.
Spilled rinse aid causes excessive
frothing, therefore please remove with
a cloth.
Appliance stops during the wash cycle.
–
Power supply interrupted.
–
Water supply interrupted.
Filling valves making striking noises
–
Caused by the installation of the water
line and has no effect on the function
of the machine. Remedial action is not
possible.
Knocking/rattling noise during rinsing
–
Spray arm is striking utensils.
–
Utensils not arranged correctly.
... on the utensils
Food residue on the utensils.
–
Utensils placed too closely together,
utensils basket overfilled.
–
Too little detergent.
–
Rinse programme too weak.
–
Spray arm rotation obstructed.
–
Spray arm nozzles blocked.
–
Filters blocked.
–
Filters incorrectly inserted.
–
Waste water pump blocked.
–
Top basket on right and left not set to
same height.
Tea or lipstick residue is not completely
removed.
–
The detergent has an inadequate
bleaching effect.
–
Too low rinsing temperature.
–
Too little/unsuitable detergent.
