Siemens SN25EI38CM, User Manual

Page: 40 / 68

en
Home Connect
40
Basic setting Display text Selection Description
Remote Start rc:01 rc:00 - rc:02 Activate or deactivate
→
"Remote Start ", Page 41 .
The following settings are possible:
¡ With the setting "rc:00", the func-
tion is permanently deactivated.
¡ With the setting "rc:01", the func-
tion can be selected via the
button.
→ "Activating Remote Start ",
Page 41
¡ With the setting "rc:02", the func-
tion is permanently activated.
This basic setting is not available un-
til after you have connected the
device with the Home Connect app.
→
"Home Connect ", Page 40
Factory setting rE: Start with
Y:ES
Confirm with Restore changed settings to the fact-
ory settings.
The settings for initial start-up must
be configured.
1
Factory setting (may vary according to model)
Changing basic settings
1.
Press ⁠.
2.
To open the basic settings, press
for 3 seconds.
a
The display shows H:xx.
a The display shows ⁠.
3.
Press repeatedly until
the display shows the required set-
ting.
4.
Press or repeatedly until the
display shows the right value.
You can change several settings.
5.
To save the settings, press
for 3 seconds.
Home Connect
Home Connect
Home Connect
This appliance is network-capable.
Connect your appliance to a mobile
device to control its functions via the
Home Connect app.
The Home Connect services are not
available in every country. The avail-
ability of the Home Connect function
depends on the availability of
Home Connect services in your coun-
try. You can find information about
this at: www.home-connect.com.
To be able to use Home Connect,
you must first set up the connection
to the WLAN home network (Wi-Fi
1
)
and to the Home Connect app.
¡
→ "Connecting the appliance to
WLAN home network (Wi-Fi)",
Page 41
1
Wi-Fi is a registered trademark of the Wi-Fi Alliance.