Siemens SN23EI26CE, Information For Use

Page: 43 / 64

Troubleshooting
en
43
Troubleshooting
Troubleshooting
Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshoot-
ing information before contacting after-sales service. This will avoid unneces-
sary costs.
WARNING
Risk of electric shock!
Incorrect repairs are dangerous.
▶
Repairs to the appliance should only be carried out by trained specialist
staff.
▶
Only use genuine spare parts when repairing the appliance.
▶
If the power cord of this appliance is damaged, it must be replaced with a
special connection cable, which is available from the manufacturer or his
Customer Service.
Appliance safety
Fault Cause Troubleshooting
Appliance door does not
open at the end of the pro-
gramme. Automatic door opening is
not activated.
▶
Activate the automatic door open-
ing.
→
"Overview of basic settings",
Page 35
Door is not correctly adjus-
ted.
▶
Adjust the appliance door as de-
scribed in the installation instruc-
tions.
The door gap must be at least
70 mm - 100 mm.
Appliance door and door
seal are soiled.
▶
Clean the appliance door and door
seal with a damp cloth and a little
washing-up liquid.
Wrong screws used to ad-
just the door gap.
▶
Use size 4X30 bolts to adjust the
door gap.
The bolts are included in the scope
of supply.
If you use bolts that are too long,
this can deactivate the function of
automatic door opening.
The safety device switches
off automatic door opening.
▶
Call "Customer Service."
→
Page 58
Appliance door brushes
against the appliance or kit-
chen cabinets
▶
Install the appliance correctly as de-
scribed in the installation instruc-
tions and align.