Getting to know your appliance
en
13
--------
Settings
The dishwasher has been preset with
certain settings for your convenience.
However you can also change this
factory setting.
To change the setting:
1.
Open the door.
2.
Switch on ON/OFF switch
(
.
3.
Press Info button
{8
for 3
seconds until the following text is
indicated on the display window at
the top
@
Scroll with
< >
Set with
- +
Leave with Setup 3 sec.
.
4.
Keep pressing button
>
)R
until the
required setting is displayed.
Make the setting with setting buttons
+ -
X
.
5.
Press and hold the Info button
{
8
for 3 seconds.
The chosen setting has now been
stored.
You have the option of resetting all
changed settings back to the original
factory settings.
Note:
When you reset your dishwasher
to the factory settings, you are taken
directly to the settings for the initial
start-up.
Rinse aid disp.
Level 5
Amount of rinse aid affects drying. When
using Multitabs, select setting 0.
Water connection *
Cold water
Connection to hot water (40-60°C) or cold
water (<40°C) possible.
Initial start-up settings
Factory setting
Infotext
by pressing Info button
{
* depending on the features of your dishwasher
Basic setting
Factory setting
Infotext
by pressing Info button
{
Time setting
12:00
Set the current time.
Time format
24 h
12h or 24h.
Time display
Time
Show end of programme with display
"Finish in" or "Finish at".
Sprache/Language
German
Language selection.
Water hardness
°E 16 - 20 medium
Setting water hardness. When using
Multitabs, select the lowest setting.
Rinse aid disp.
Setting 5
Amount of rinse aid affects drying. When
using Multitabs, select setting 0.
Sensor setting
Standard
Adjustment of soiling detection for
optimum cleaning result.
* depending on the features of your dishwasher
