Siemens SN 66M094 Operating Instructions Manual Download Page 38

Page: 38 / 40

Installation and connection

ヽ

Use only a residual current operated
circuit-breaker which features
the symbol

‚

. Only this extension

guarantees compliance with
the currently valid regulations.

ヽ

The appliance features a water
damage protection system. Please
note the system will not function

unless

the power supply

is connected.

Removing the appliance

Also observe
the sequence of worksteps here.

Disconnect the appliance from
the power supply.

Turn off the water supply.

Disconnect the waste water
and fresh water connections.

Loosen fastening screws for the
furniture parts.

If fitted, remove the base panel.

Pull out the appliance, carefully
pulling the hose behind.

Transportation

Empty the dishwasher and secure loose
parts.

Drain the appliance according to the
following steps:
1.

Turn on the tap.

Open the door.

Switch on ON/OFF switch

(

Select programme with the highest
temperature.
The expected programme duration is
indicated on the numerical display

Press START button

Close the door.
Programme sequence starts.

Open door after approx. 4 minutes.

Press START button

until

‹

‹‚

is indicated on the digital display.

Close the door.

10.

Open door after approx. 1 minute.
The numerical display indicates

‹

‹‹

11.

Switch off ON/OFF switch

(

12.

Turn off the tap, disconnect supply
hose and drain water.

Transport appliance upright only.

(This prevents residual water from
running into the machine control and
damaging the programme sequence.)

Protection against frost

Protection against frost (Emptying the appliance)

If the appliance is in a room where there
is a risk of frost (e.g. holiday home),
empty the appliance completely (see
Transportation).

6XEMHFWWRFKDQJHV

Downloaded from DishWasher-Manual.com Manuals

Summary of Contents for SN 66M094









































Search results

Summary of Contents for SN 66M094

Reviews:

Related manuals for SN 66M094

Brands by name

Popular brands

Siemens SN 66M094, Operating Instructions Manual

Search results

Summary of Contents for SN 66M094

Reviews:

Related manuals for SN 66M094

Brands by name

Popular brands