"Automatic mode"
"Automatic mode" supports the transfer of the following direction to the totalizer:
● "Positive and Negative (Balanced)" (positive edge
BalPV2/PV3/PV4Aut
)
● "Positive" (positive edge
PosPV2/PV3/PV4Aut
)
● "Negative" (positive edge
NegPV2/PV3/PV4Aut
)
"Automatic mode" supports the transfer of the following command to the totalizer:
● "Hold" (positive edge
HoldPV2
/
PV3
/
PV4Aut
)
● "Totalize" (positive edge
TotalizePV2
/
PV3
/
PV4Aut
)
"Automatic mode" supports the transfer of the following commands to the dosing unit:
● "Start" (positive edge
DSrtAut
)
● "Continue" (
DContAut
= 1)
● "Pause" (
DPauseAut
= 1)
● "Stop" (
DStpAut
= 1)
"Manual mode"
"Manual mode" supports the transfer of the following direction to the totalizer:
● "Positive and Negative (Balanced)" (positive edge
BalPV2/PV3/PV4Man
)
● "Positive" (positive edge
PosPV2/PV3/PV4Man
)
● "Negative" (positive edge
NegPV2/PV3/PV4Man
)
"Manual mode" supports the transfer of the following command to the totalizer:
● "Hold" (positive edge
HoldPV2
/
PV3
/
PV4Man
)
● "Totalize" (positive edge
TotalizePV2
/
PV3
/
PV4Man
)
"Manual mode" enables the transfer of the following commands to the dosing unit:
● "Start" (positive edge
DSrtMan
)
● "Continue" (
DContMan
= 1)
● "Pause" (
DPauseMan
= 1)
● "Stop" (
DStpMan
= 1)
"Out of service"
For general information about the "out of service" mode, refer to the APL Online Help.
13.1.3
Functions of SiFC43PA
The functions for this block are listed below.
SITRANS FC430 PA
13.1 SiFC43PA
SITRANS Library for PCS 7
552
Function Manual, 05/2019, A5E35351976-11
Summary of Contents for SITRANS PCS 7
Page 12: ...Table of contents SITRANS Library for PCS 7 12 Function Manual 05 2019 A5E35351976 11 ...
Page 418: ...SITRANS P 10 2 SitraPDr SITRANS Library for PCS 7 418 Function Manual 05 2019 A5E35351976 11 ...
Page 850: ...Index SITRANS Library for PCS 7 850 Function Manual 05 2019 A5E35351976 11 ...