Page FR-26
SITRANS LVS100/200 – INSTRUCTIONS DE SERVICE
7ML19985FT63
mmm
mm
Fr
a
n
ç
a
is
SITRANS LVS200 version avec tube
prolongateur
Montage
Outils conseillés :
1.
Ouvrir le couvercle et retirer l'électronique.
2.
Insérer le câble du détecteur dans le tube de 1" fourni par le client et le boîtier.
3.
Monter l'ensemble fourche, tube prolongateur et boîtier avec la clé plate 36 mm.
Appliquer un produit d'étanchéité adapté sur les filetages du tube prolongateur.
4.
Aligner les marquages sur la fourche et sur les lames tel qu'illustré dans le schéma
page 16. (Le raccord process comporte un marquage permettant d'orienter les
lames et de positionner la fourche verticalement.)
5.
Raccourcir le câble du détecteur pour obtenir une longueur libre de 150 mm (5.9").
6.
Raccourcir le câble de prise de terre pour obtenir une longueur libre de 220 mm
(8,7").
7.
Préparer le câble du détecteur tel qu'illustré ci-dessus. Retirer 8 mm (max.) de
chaque câble.
•
tournevis plat moyen Phillips ou 6 - 8 mm (¼”)
•
pince à sertir
•
tournevis plat 3 mm (1/8”)
•
clé plate 36 mm
•
coupe-câbles
•
clé à tubes
•
pinces à dénuder
N.B. :
Ne pas tourner l'ensemble fourche. Veiller à ne pas tordre l'ensemble fourche
durant le montage.
boîtier
tube prolongateur
fourni par le client
ensemble fourche
câble de prise de terre (vert/jaune)
220 mm
(8.7")
150 mm (5.9")
max. 8 mm
18 mm