Siemens Sitrans LR200, Quick Start Manual, Page: 22 / 276

7ML19985XC81 SITRANS LR200 (HART) – QUICK START MANUAL Page EN-21
m
mmmm
Englis
h
Electronic Device Description (EDD)
• You can locate the EDD in Device Catalog, under Sensors/Level/Echo/Siemens
Milltronics/SITRANS LR200.
• Check the product page of our website at: www.siemens.com/LR200, under Downloads,
to make sure you have the latest version of SIMATIC PDM, the most recent Service Pack
(SP) and the most recent hot fix (HF). If you need to install a new EDD see
Configuring a
new device
below.
Configuring a new device
1. Check that you have the most recent EDD, and if necessary download it from the product
page listed above. Save the files to your computer, and extract the zipped file to an easily
accessed location. Launch SIMATIC PDM – Manager Device Catalog, browse to the
unzipped EDD file and select it.
2. Launch SIMATIC PDM and create a new project for LR200. Application Guides for setting
up HART devices with SIMATIC PDM can be downloaded from the product page of our
website at: www.siemens.com/LR200.
3. Upload parameters to the PC/PG.
4. Configure the device via the Quick Start wizard (see below).
Quick Start Wizard via SIMATIC PDM
Launch SIMATIC PDM, open the menu Device – Quick Start, and follow steps 1 to 5.
Note
: Clicking on Cancel during an upload from device to SIMATIC PDM will result in some
parameters being updated.
Notes:
• The Quick Start wizard settings are inter-related and changes apply only after you click on
Transfer at the end of step 5.
• Each time the Quick Start Wizard is initiated, the start-up settings are factory defaults.
The Wizard will not recall previous user-defined settings.
• Click on BACK to return and revise a setting or Cancel to exit the Quick Start.
Quick
Start