manualshive.com logo in svg

Siemens SITRANS F SITRANS FC410, Operating Instructions Manual, Page: 10 / 48

Share
Download
Siemens SITRANS F SITRANS FC410 Operating Instructions Manual Download Page 10

QR code

With the use of a smart phone, the QR code provides a direct link to
● the product support portal, which includes access to the "How to Install" YouTube video
● the product and production-specific documentation maintained in the production database.

1.2

Designated use

Use the device in accordance with the information on the nameplate and in the Technical data 

(Page 41).

NOTICE
Use in a domestic environment
This Class A Group 1 equipment is intended for use in industrial areas.
In a domestic environment this device may cause radio interference.

1.3

Product compatibility

Manual 

edition

Remarks

Device revision

Compatibility of device integration package

05/2020

First revision

Modbus RS-485 RTU
FW: 4.00.00-xx
HW: 3

SIMATIC PDM V8.2 Service 

Pack 1 or later

EDD: 2.00.01 or later

1.4

Checking the consignment

1. Check the packaging and the delivered items for visible damages.
2. Report any claims for damages immediately to the shipping company.

Introduction
1.4 Checking the consignment

SITRANS FC410

10

Compact Operating Instructions, 05/2020, A5E39942309-AB

Summary of Contents for SITRANS F SITRANS FC410

















































Reviews:

No comments