to the WirelessHART network. The join key can only be entered with the quick start wizard or
in online mode using the "Wireless settings" device function.
Parameter
Meaning
Example
Default
Network ID
Identification number of the network to which
the WirelessHART adapter connects.
● Range 0 ... 65535
43
0
Wireless mode
Display of the join network process of the Wire‐
lessHART adapter.
● Idling
● Active search
● Negotiate: Join parameters are negotiated
with the Network Manager.
● Blocked: Denied by Network Manager and
temporarily excluded from the network.
● In operation: Connection established
● Terminated: Permanent exclusion
● Deep sleep/ultra low power/passive scan:
Inactive
Radio output power
Power of the radio signal.
● 0 or 10 dBm
● National restriction to 0 dBm possible
10 dBm
10 dBm
Join key part 1 of 4
Network password, 8 characters, format: hexa‐
decimal, part 1 of 4.
Join key part 2 of 4
Network password, 8 characters, format: hexa‐
decimal, part 2 of 4.
Join key part 3 of 4
Network password, 8 characters, format: hexa‐
decimal, part 3 of 4
Join key part 4 of 4
Network password, 8 characters, format: hexa‐
decimal, part 4 of 4.
Network search time [s] Time for active join attempts in s after entering
the correct "join key" and the correct "network
ID".
● Following this, the WirelessHART adapter
continues to attempt to join the network,
however with reduced intensity; the yellow
LED goes off.
3600
3600
Join mode
The way in which the WirelessHART adapter
joins the network:
● Do not attempt to join: Do not join network
● Join now: Join the network
● Attempt to join immediately on power up or
reset: Join the network immediately after a
restart
Attempt to join immedi‐
ately on power up or re‐
set
Attempt to join immedi‐
ately on power up or
reset
Parameter assignment/addressing
9.3 Wireless communication
WirelessHART Adapter SITRANS AW200
52
Operating Instructions, 02/2020, A5E02777161-AA
