SITRANS P, MPS series
16
A5E00136035-04
Operating Instructions
Safety Guidelines
These instructions contains notices intended to ensure personal safety, as well as to protect
the products and connected equipment against damage. These notices are highlighted by the
symbols shown below and graded according to severity by the following texts:
indicates an imminently hazardous situation which, if not avoided, will result in
death or serious injury.
indicates hazardous situation which, if no avoided,
could
result in death or serious
injury.
used with the safety alert symbol indicates a potentially hazardous situation which,
if not avoided, may result in minor or moderate injury.
used without the safety alert symbol indicates a potentially hazardous situation
which, if not avoided, may result in property damage.
NOTICE used without safety alert symbol indicates a potential situation which, if
not avoided, may result in an undesireable result or state.
indicates a reference to a possible advantage when this recommendation is fol-
lowed.
Copyright © Siemens AG 2001 All rights reserved
The reproduction, transmission or use of these instruc-
tions or its contents is not permitted without express
written authority. Offenders will be liable for damages.
All rights, including rights created by patent grant or
registration of a utility model or design, are reserved.
Siemens AG
Bereich Automatisierungs- und Antriebstechnik
Geschäftsgebiet Process Instrumentation and Analytics
D-76181 Karlsruhe
Disclaimer of Liability
We have checked the contents of these instructions for
agreement with the hardware and software described. Since
deviations cannot be precluded entirely, we cannot guarantee
full agreement. However, the data in these instructions are
reviewed regularly and any necessary corrections included in
subsequent editions. Suggestions for improvement are wel-
comed.
© Siemens AG 2001
Technical data subject to change.
DANGER
WARNING
CAUTION
CAUTION
NOTICE
NOTE