background image

Operation 

86

 

Siemens Building Technologies

 

 

Fire Safety & Security Products 

 

03.2007

 
 

 

If all the cameras in a page are Off, have lost video or are set to Covert (unless the 
user has authority to view covert cameras), that page will be excluded from the 
sequence. 

 

 

 

 

 

NOTE 

The Full Sequence for the full sequence monitoring and the Cameo Sequence for the cameo 
sequence monitoring should be selected in the 

Display

 setup screen (

Sequence

 tab). 

 

 

 

Pressing the Freeze button will freeze the current image on the screen until you 
press the button again. While in the Freeze mode, the icon   displays in bottom-
left corner if 

Freeze

 is selected in the 

Display

 setup screen (

OSD

 tab). 

To display cameras sequentially on a spot monitor, press the Spot button and 
select the Spot Monitor and Sequence from the menu. 

9.2.1 

Active Cameo mode 

 

You can enter the Active Cameo mode by pressing the 

 button in any multi-view 

format. The yellow outline surrounding the video indicates the active cameo, and 
pressing the arrow buttons moves the active cameo. Pressing the   button while 
in the Active Cameo mode exits the Active Cameo mode. The active cameo mode 
will remains in effect for 15 seconds if there is no further operation. 

In active cameo mode, press the button for the camera you want displayed as 
active cameo. After setting the camera number to active cameo, the DVR moves 
the active cameo to the next cameo. You can change the screen layout in this way. 

9.2.2 PIP 

mode 

 

You can display a Picture-in-Picture by pressing the Display button. You can 
change the location of the PIP counter-clockwise and clockwise by pressing the Up 
and Down arrow buttons and change its size by turning the Jog Dial clockwise or 
counter-clockwise. 

9.2.3 Zoom 

mode 

 

You can enlarge an area of the video by pressing the Zoom button. For a few 
seconds after pressing the Zoom button, a PIP displays. Inside the PIP, a 
rectangle shows the area that is enlarged. You can move the rectangle around 
using the arrow buttons. While in the Zoom mode, you can enlarge the area more 
by pressing the 

 button. The Zoom mode options are 2x, 3x and 4x. Exit the 

Zoom mode by pressing the Zoom button. While in the Zoom mode, the icon   
displays in bottom-left corner if Zoom is selected in the 

Display

 setup screen (

OSD

 

tab). 

 

Summary of Contents for SISTORE AX16 200



























































































































Reviews: