Siemens SIPROTEC 4 7XT71 Series, Manual, Page: 89 / 122

Panel Flush Mounting or Cabinet Flush Mounting (7XT7100-0EA00)
²
Pull off the 2 covering caps on the front cover upward or downward as appropriate (see Figure 4-1 ).
²
Push the device, depending on the application, into the cut-out in the panel or in the control cabinet.
i i
NOTE
Pay attention to the dimensions and notes in chapter 3.1 Dimensions of the Injection Units 7XT7100 !
²
Fix the device to the panel or in the control cabinet with 4 screws.
[le_view_front-device_7XT71, 1, --_--]
Figure 4-3 Mounting the Device in the Panel
(1) M4 screws
²
Push the 2 covering caps back into the front cover (see Figure 4-1 ).
²
Wire the device according to chapter 4.4 Connection .
In this type of assembly, the junction block is accessible from the back.
4.3
Assembly and Connection
4.3 Panel Flush Mounting or Cabinet Flush Mounting (7XT7100-0EA00)
SIPROTEC 4/5, Injection unit 7XT71, Manual 27
C53000-B1174-C128-8, Edition 05.2020