Siemens SIPROTEC 4 7XT71 Series, Manual, Page: 87 / 122

Panel Surface Mounting (7XT7100-0BA00)
²
Pull off the 2 covering caps at the top and bottom of the front cover.
[scpullcc, 1, en_US]
Figure 4-1 Pulling off the Covering Caps
²
Screw the 2 Z-shaped angle brackets contained in the scope of delivery tightly to the top and bottom of
the front cover using 2 M4 screws for each fixing.
²
To do this, insert the screws through the holes in the front cover and screw on the angle brackets. The 2
holes on the narrow side of the Z-shaped angle brackets have M4 threads.
[scanbauzink, 1, en_US]
Figure 4-2 Fixing the Z-Shaped Angle Brackets on the Front Cover
²
Fix the device to the panel with 4 screws.
4.2
Assembly and Connection
4.2 Panel Surface Mounting (7XT7100-0BA00)
SIPROTEC 4/5, Injection unit 7XT71, Manual 25
C53000-B1174-C128-8, Edition 05.2020