Siemens SINUMERIK 840D, Operating Manual

Page: 523 / 610

Program management
13.13 Setup data
Milling
Operating Manual, 03/2010, 6FC5398-7CP20-1BA0
523
13.13 Setup data
13.13.1 Backing up setup data
Apart from programs, you can also save tool data and zero point settings.
You can use this option, for example, to back up tools and zero point data for a specific
machining step program. If you want to execute this program at a later point in time, you will
then have quick access to the relevant settings.
Even tool data that you have measured on an external tool setting station can be copied
easily into the tool management system using this option.
Backing-up job lists
If you wish to backup a job list, which contains ShopMill and G code programs, you obtain
dedicated selection boxes to backup the tool data and zero points.
Backing up data
Data
Tool data 
No

All used in the program (only for ShopMill program and job
list with ShopMill programs)

Complete tool list
Tool data for ShopMill programs
-- only available for job list with
ShopMill and G code programs

No

All used in the program
 Complete tool list
Tool data for G code programs
-- only available for job list with
ShopMill and G code programs
 No
 Complete tool list
Magazine assignment  Yes

No
Zero points 
No
The selection box "Basis zero point" is hidden

All used in the program (only for ShopMill program and job
list with ShopMill programs)

All
Zero points for ShopMill programs
-- only available for job list with
ShopMill and G code programs

No
The selection box "Basis zero point" is hidden
 All used in the program

Complete tool list
Zero points for G code programs
-- only available for job list with
ShopMill and G code programs

No
The selection box "Basis zero point" is hidden
 All