5
Siemens Schweiz AG
A6V11387248_en--_a
Building Products
2020-08-28
Mounting
● Refer to the mounting instructions listed in the Product documentation section.
● Cylinder installation and replacement requires space. Ensure that there is sufficient
space in front of the cylinder battery to facilitate the handling of the cylinders.
● Ensure that there is sufficient space above the cylinder rack to install the manifold.
A wall-mounted rack should only be installed on a reinforced concrete wall. If the wall is
made of bricks or plasterboard, or if there is any doubt about the wall structure, it is
recommended to use a free-standing rack.
Maintenance
Storage
● Store in its original packaging, protected from shocks.
● Store in a clean and dry location, protected from bad weather.
Inspection
● Check that the product is in a good condition.
● Check that the nuts are correctly tightened using the appropriate wrench. Adjust if
necessary.
The frequency of the product inspection is subject to applicable local regulations. For more
information, refer to the maintenance documentation.