Siemens Sinamics S120M, Equipment Manual

Page: 113 / 186

6.3 Interface description
6.3.1 Overview
DRIVE-CLiQ Extension (DQE) has two connections for the S120M hybrid connector as well as
a connection for DRIVE-CLiQ.
The DRIVE-CLiQ signals of the incoming hybrid line are terminated and the DRIVE-CLiQ
signals of the DRIVE-CLiQ cable are fed into the new hybrid line. All other connections are only
looped through from the inputs to the outputs.
'5,9(&/L4
'4287 '42/'
;
287 ,1
3( 3(
0
3
0
3
0
3
0
3
; ;
Figure 6-1 Block diagram of DRIVE-CLiQ Extension
Note
The X1 (input) and X2 (output) connections must not be interchanged.
6.3.2 Hybrid connector
Connecting the hybrid cable from the S120M of the previous line
Table 6-1 Terminal strip X1 (IN)
Terminal Signal name Technical data
1 1 (TXP) Transmit data +
2 2 (RXP) Receive data +
3 3 (TXN) Transmit data -
4 4 (RXN) Receive data -
5 PE Potential equalization
6 M Electronics ground
7 + 48 VDC power supply
8 DCN DC link voltage - (M600)
9 DCP DC link v (P600)
- DQ_SHIELD Shield
DRIVE-CLiQ Extension
6.3 Interface description
Manual, 06/2019, 6SL3097-5AW00-0BP1
111