6
SINAMICS IOP, Getting Started Guide 01/09 - A5E02449215B2
Language selection
To change the language of the IOP the following actions should be
performed.
1.
Select "Menu" by rotating the push-wheel.
2. Press
OK.
3.
Select "Extras" for the sub-menu.
4.
Select "language" from the sub-menu.
5.
Use the push-wheel to select the required language.
6.
Press OK to confirm selection.
Setting time and date
When the IOP is connected to the Inverter and powered-up, the IOP
automatically interrogates the Control Units internal clock functions and sets
the IOP's date and time.
1.
Select "Menu" by rotating the push-wheel.
2. Press
OK.
3.
Select "Extras" for the sub-menu.
4.
Select "Time and date" from the sub-menu.
5.
Rotate the push-wheel until value of the hours are correct.
6.
Press OK - the cursor will move to the minute field.
7.
Rotate the push-wheel until value of the minutes are correct.
8.
Using this technique change the day, month and year as required.
Function Status
Icon
Remarks
Auto
Command source
Hand
Off
Inverter status
Ready
The icon will rotate when ready.
Fault pending
Fault
Alarm pending
Alarm
