Appendix
A.1 New and extended functions
Converter with the control units CU240D-2
328
Operating Instructions, 04/2018, FW V4.9 SP10, A5E34262100B AF
Function
SINAMICS
G120
G120D
23 Expansion of the temperature sensors to include DIN-Ni1000 for analog
inputs AI 2 and AI 3
-
-
✓
-
-
-
-
-
-
24 Communication via AS-Interface.
Default setting of the communication via AS-i: p0015 macros 30, 31, 32
and 34
✓
-
-
-
-
-
-
-
-
25 Communication expansion via Modbus:
Adjustable parity bit, access to parameters and analog inputs
✓
✓
✓
✓
✓
✓
-
-
-
26 Extending communication via BACnet:
Access to parameters and analog inputs
-
-
✓
-
-
-
-
-
-
27 The bus error LED for communication via USS and Modbus can be
switched off
✓
✓
✓
✓
✓
✓
-
-
-
28 Default of the minimum speed to 20% of the rated motor speed
-
-
✓
-
-
-
-
-
-
29 For commissioning with an operator panel, the inverter automatically
backs up the measured data retentively in the ROM after identification of
the motor data.
✓
✓
✓
✓
✓
✓
✓
✓
✓
30 The result of the energy savings calculation for flow machines is available
as a connector
✓
✓
✓
✓
✓
✓
✓
✓
✓
31 New "ppm" unit (parts per million) for unit switching
✓
✓
✓
✓
✓
✓
✓
✓
✓
32 Displaying speeds during commissioning via operator panel in units of Hz
instead of rpm. Conversion from Hz to rpm via p8552
-
-
✓
-
-
-
-
-
-
33 Voltage-dependent current limit for 600V devices of Power Module
PM330 and PM240-2
-
-
✓
✓
✓
✓
-
-
-
