Siemens SINAMICS BOP-2, Operating Instructions Manual

Page: 45 / 54

Extras
Basic Operator Panel 2 (BOP-2)
Operating Instructions, 02/2016, A5E37143404B AA
45
From BOP
This function writes parameter data stored in the BOP-2 memory to the Inverter memory.
The symbol denotes where the screen automatically displays a new screen on the
completion of a process.
Image 11-4 Extras - reading data from the BOP
To card
This function writes parameter data from the Inverter's memory to the memory card in the
Control Unit.
Note
Saving parameter sets to a memory card
When manually changing parameter settings using the BOP-2, all changes are automatically
saved to the default parameter set (0) on the memory card (if a memory card is already
inserted into the memory card reader). Therefore, parameter set (0) is not displayed as an
option when saving parameter sets to a memory card with the BOP-2.
During the saving process, the user is given the option to selected a unique number between
1 and 99, under which the parameter set will be stored. Only parameters that have been
modified will be stored on the memory card. When the parameter set is selected and
confirmed, the saving process begins and automatically overwrite any previous data saved
under the selected parameter set number.
The symbol denotes where the screen automatically displays a new screen on the
completion of a process.