Siemens SINAMICS BOP-2, Operating Instructions Manual

Page: 26 / 54

Control
Basic Operator Panel 2 (BOP-2)
26
Operating Instructions, 02/2016, A5E37143404B AA
Note
Reverse function
When the JOG function is activate; pressing and simultaneously for more than 3
seconds toggles the REVERSE function.
Reverse
The Reverse function, when selected, will allow the motor to be manually rotated in the
reverse direction from its normal forward motion with each press of . If is pressed
continuously, the motor will rotate continuously in reverse until is released.
To enable or disable the Reverse function, the actions shown in the following figure should
be performed:
Image 7-4 Reverse function