Siemens SIMOTION P320-4 E Page 141 Manual Download

Page: 141 / 166

9.6

Integrated DC power supply

Technical specifications

DC power supply
Input voltage

24 V DC (-20%/+20%)

Power consumption

Max. 90 W

Power failure buffering

hold-up time = 20 ms at 20.4 V

(DC_FAIL is active after > 5 ms)

Maximum continuous output power

80 W

Degree of protection

IP 20

Protection class

Protection class I (a protective conductor must be

connected to the device)

The power specifications apply to the power supply component not to the device.

Note
Inrush current
The device requires an inrush current of at least 6.5 A for 50 ms.
The peak value of the startup current depends on the input voltage and the impedance of the

24 V power source. Peak currents greater than 6.5 A are possible. This will not have a negative

impact on device functionality.

Technical data

9.6 Integrated DC power supply

SIMOTION P320-4 E / P320-4 S

Manual, 03/2018, A5E36004933B

141

Summary of Contents for SIMOTION P320-4 E







































































































































































Search results

Summary of Contents for SIMOTION P320-4 E

Reviews:

Related manuals for SIMOTION P320-4 E

Brands by name

Popular brands

Siemens SIMOTION P320-4 E, Manual

Search results

Summary of Contents for SIMOTION P320-4 E

Reviews:

Related manuals for SIMOTION P320-4 E

Brands by name

Popular brands