Siemens SIMOTICS T-1FW3, Configuration Manual

Page: 53 / 354

Mechanical properties
3.4 Bearing version
1FW3 complete torque motors
Configuration Manual, 08/2020, A5E46027705B AA
51
3.4 Bearing version
The bearings for the complete torque motors are greased for life and designed for a
minimum ambient temperature in operation of -15 °C.
Table 3- 8 Bearing designation and bearing properties for the normal version with standard bearings
Shaft version Basis bearing designation
SH 150 SH 200 SH 280
Hollow shaft DE (fixed bearing) 61838 61838 61864
Hollow shaft NDE (floating bearing) 61832 61832 61856
Plug-on shaft DE (fixed bearing) 61838 61838 61864
Plug-on shaft NDE (floating bearing) 6213 6020 6230
Solid shaft DE (fixed bearing) 6215 6220 6230
Solid shaft NDE (floating bearing) 6213 6020 6230
Possible mounting positions Horizontal and vertical Horizontal and vertical Horizontal and vertical
You can find further information about the bearings in Chapter "Bearing change intervals
(Page 69)".
3.5 Shaft end and shaft versions
The complete torque motor 1FW3 can be ordered with 3 different shaft versions:
● Hollow shaft
● Plug-on shaft
● Solid shaft
The DE shaft end is cylindrical in accordance with DIN 748-3 (IEC 60072-1).
Table 3- 9 Hollow shaft
Frame size Flange centering edge d
i
[mm]
1FW315 ☐ 153 H7
1FW320 ☐ 153 H7
1FW328 ☐ 250 H7
Table 3- 10 Plug-on shaft
Frame size Flange centering edge d
i
[mm] Support d
i
[mm]
1FW315 ☐ 153 H7 70 H6
1FW320 ☐ 153 H7 85 H6
1FW328 ☐ 250 H7 110 H7