Preparing for use
4.2 Transportation and storage
S-1FK7 DYA G2 synchronous motors with planetary gearbox
44
Operating Instructions, 05/2018, A5E44881183B AA
4.2
Transportation and storage
4.2.1
Transport
WARNING
Danger of the motor down due to incorrect transport and/or lifting
Due to incorrect transport and/or lifting, the motor can fall and cause death, severe injury
and/or damage to property.
•
Lifting devices, ground conveyors, and load suspension equipment must comply with
requirements.
•
The maximum capacity of the lifting equipment and the load suspension device must
correspond to the weight of the motor (see the rating plate).
•
Do not attach any additional loads to the lifting equipment.
•
To hoist the motor, use suitable cable-guidance or spreading equipment, particularly if
the motor is equipped with built-on assemblies.
•
The motor must not be lifted or transported by means of the power connector or signal
connector.
•
Do not stand in the slewing range of hoisting gear or under suspended loads.
Note
Comply with the local national regulations for the transportation of motors.
●
Use suitable load suspension devices when transporting and installing the motor.
●
Transport and store the servo geared motors in the original packaging.
●
Transport the motor carefully.
Lifting and transporting the motor using slings
You can lift and transport the motor using slings.
Figure 4-1
Transporting with slings
