Underwriters Laboratories
The SIMOTICS motor series generally complies with UL and cUL requirements as component
of motor applications - and is correspondingly listed. Specifically developed motors and
functions are the exceptions in this case. Here, it is important that you carefully observe the
contents of the quotation and that there is a cUL mark on the rating plate (nameplate)!
Quality management system
Siemens AG employs a quality management system that meets the requirements of ISO 9001
and ISO 14001.
Certificates that can be downloaded
You can download certificates for the SIMOTICS motor series at the following link:
Certificates (
https://support.industry.siemens.com/cs/ww/en/ps/13358/cert
Drive
The motor speed is controlled using a converter.
NOTICE
Destruction of the machine when operated directly from the line supply
The machine will be destroyed if it is directly connected to the line supply. Only operate the
machine using a converter.
Types of construction
The motor is supplied with two attached lifting eyes. The type construction can be found on
the rating plate.
Vertical type of construction
For IM V5 and IM V15 types of construction with "shaft extension pointing downward", the
motor is equipped with two additional Vario eye bolts. The Vario eyebolts are in the terminal
box.
NOTICE
Protection against falling parts
For vertical types of construction, protect the air intake or discharge against falling parts, e.g.
by attaching a canopy. Otherwise the machine could be damaged.
Description
SIMOTICS M-1PH8 1PH818., 1PH822., 1PH828.
24
Operating Instructions 10/2017
Summary of Contents for SIMOTICS M-1PH818
