Siemens SIMOGEAR BA 2030 Translation Of The Original Operating Instructions Download Page 11

Page: 11 / 208

General information and safety notes

1.2 Copyright

BA 2030
Operating Instructions, 02/2021, A5E37880173A/RS-AM

The described gearboxes correspond to the state-of-the-art at the time these operating

instructions were printed.
Siemens AG reserves the right to change individual components and accessory parts in the

interest of further development. The changes serve to improve the performance and safety.

The significant features are retained. The operating instructions are always being updated

with new contents.
The latest versions of the operating instructions, the declaration of incorporation and the

declarations of conformity are available in electronic form in the Industry Online Support

(

https://support.industry.siemens.com/cs/ww/en/ps/13424/man

You can find technical configuration data, spare parts lists and certificates of compliance on

the Intranet at Once Delivered (

https://c0p.siemens.com:8443/sie/1nce_delivered

You can find the contact data of your Technical Support in the Database of contacts at

Siemens AG (

www.siemens.com/yourcontact

If you have any technical questions, please contact Technical Support

(

https://support.industry.siemens.com/cs/ww/en/sc/2090

Europe and Africa

Telephone: +49 (0) 911 895 7222

[email protected]
America

Telephone: +1 800 333 7421

[email protected]
Asia / Australia / Pacific

Telephone: +86 400 810 4288

[email protected]

1.2

Copyright

The copyright to these operating instructions is held by Siemens AG.
These operating instructions must not be wholly or partly reproduced for competitive

purposes, used in any unauthorized way or made available to third parties without

agreement of Siemens AG.

Summary of Contents for SIMOGEAR BA 2030

















































































































































































































Search results

Summary of Contents for SIMOGEAR BA 2030

Reviews:

Related manuals for SIMOGEAR BA 2030

Brands by name

Popular brands

Siemens SIMOGEAR BA 2030, Translation Of The Original Operating Instructions

Search results

Summary of Contents for SIMOGEAR BA 2030

Reviews:

Related manuals for SIMOGEAR BA 2030

Brands by name

Popular brands