Siemens SIMOCODE pro C, System Manual

Page: 61 / 408

SIMOCODE pro
System Manual, 05/2019, A5E40507475002A/RS-AD/004
61
Check list for selecting a device series
6
The following check list should help you decide upon the optimum device series for your
requirements:
Function/component SIMOCODE pro
BP GP HP
C S V PN GP V PB V MR V PN V EIP
Control functions
Intelligent overload
relay
✓ ✓ ✓ ✓ ✓ ✓ ✓
Direct starter, reversing
starter
✓ ✓ ✓ ✓ ✓ ✓ ✓
Star-delta starter — ✓ ✓ ✓ ✓ ✓ ✓
Dahlander starter — — — ✓ ✓ ✓ ✓
Pole-changing starter — — — ✓ ✓ ✓ ✓
Soft starter — ✓ ✓ ✓ ✓ ✓ ✓
Solenoid valve — — — ✓ ✓ ✓ ✓
Positioner — — — ✓ ✓ ✓ ✓
Can be combined with
reversing function
— — — ✓ ✓ ✓ ✓
Protection functions Overload protection ✓ ✓ ✓ ✓ ✓ ✓ ✓
Thermistor motor
protection with PTC
(binary)
✓ ✓ ✓ ✓ ✓ ✓ ✓
Stalled rotor ✓ ✓ ✓ ✓ ✓ ✓ ✓
Unbalance ✓ ✓ ✓ ✓ ✓ ✓ ✓
Phase failure ✓ ✓ ✓ ✓ ✓ ✓ ✓
Dry-running protection
for centrifugal pumps
by means of active
power monitoring
Minimum level; in
combination with
current/voltage
measuring modules for
dry-running protection
— — — ✓ — ✓ ✓
Measurement functions Current measurement ✓ ✓ ✓ ✓ ✓ ✓ ✓
Current/voltage/power
measurement
— — — ✓ ✓ ✓ ✓
Monitoring functions Current limit monitoring ✓ ✓ ✓ ✓ ✓ ✓ ✓
Ground-fault monitoring
(internal)
✓ ✓ ✓ ✓ ✓ ✓ ✓
Ground-fault monitoring
(residual current
transformer)
— ✓ ✓ ✓ ✓ ✓ ✓
Voltage monitoring — — — ✓ ✓ ✓ ✓
Temperature monitoring — ✓ ✓ ✓ ✓ ✓ ✓
Active power monitoring — — — ✓ ✓ ✓ ✓