SIMATIC S5 CPU Direct Driver
GP-Pro EX Device/PLC Connection Manual
2
PREFACE
This manual describes how to connect the Display and the External Device (target PLC).
In this manual, the connection procedure will be described by following the below sections:
1
System Configuration
This section shows the types of External
Devices which can be connected and SIO
type.
)
2
Selection of External Device
Select a model (series) of the External
Device to be connected and connection
method.
)
Selection of External Device (page 6)
3
Example of Communication Settings
This section shows setting examples for
communicating between the Display and
the External Device.
)
Example of Communication Setting (page 7)
4
Setup Items
This section describes communication
setup items on the Display.
Set communication settings of the Display
with GP-Pro EX or in off-line mode.
)
Operation
5
Cable Diagram
This section shows cables and adapters
for connecting the Display and the
External Device.
)
