Siemens SIMATIC S5 1P 243, Operating Instructions & Installation Instructions

Page: 92 / 142

9.1.7.6 Alternative types of grease for the operation of roller bearings
In the following table, you will find a list of approved alternative types of grease.
Filling with oil for the first time Alternative permissible greases
Shell Gadus S2 V100 3 Aral Aralub HL3
BP Energrease LS3
Castrol Optimol Olista Longtime 3
Exxon Mobil Beacon EP3
Mobilux EP3
OMV Signum L3
SKF LGMT 3
Shell Gadusrail S4 HS EUDB
(dt. Bezeichnung)
Shell Gadus S5 V42P 2.5(int.
Bezeichung)
Currently no comparable grease with Dm*n≥1,000,000 is known.
Shell Gadus S5 V100 2 Exxon Mobil Mobilith SHC 100
Esso Unirex N3 Exxon Mobil Mobilgrease XHP 103
Shell Gadus S5 V100 2
Shell Gadus S3 T100 2 BP Energrease SY2202
Castrol Firetemp XT2
Chevron Grease SRI2
Klüber Petamo GHY 133N
SKF LGHP 2
Exxon Mobil Polyrex EM
Observe the following when changing over to an alternative type of grease that is permitted according
to the table:
Bearings with permanent lubrication:
● Completely remove the old grease from the bearing before regreasing it.
● Fill roller bearings completely with grease and cavities in the bearing cover only up to one
third.
Bearings with regreasing:
If complete replacement of grease and cleaning of the bearing is not possible, keep the
operating time to a minimum when different greases are mixed. To do this, thoroughly grease
the bearing when the machine is running with about twice the amount of grease until spent
grease has been removed from the greasing ducts. Then regrease 4x at intervals of ¼ of the
Maintenance
9.1 Inspection and maintenance
LOHER CHEMSTAR 1PS5
92
Operating Instructions 03/2014