Siemens SIMATIC RF310M Operating Instructions Manual Download Page 75

Page: 75 / 114

RF-MANAGER RF310M software

9.3 Application mode "Mobile"

SIMATIC RF310M Mobile Reader
Operating Instructions, 10/2013, J31069-D0191-U001-A6-7618

9.3.4

The functions in the "File" menu

9.3.4.1

Overview of file functions

The following options are available in the "File" menu:

●

Open

●

Save Tag

●

Save Tag As

●

Exit

Figure 9-12 The "File" functions

9.3.4.2

Open

The function is available in the application mode "Mobile" when "Edit Tag" has been

activated in RF-MANAGER.
You can load a file via "File > Open" if the file was saved beforehand with the command "File

> Save" or if it was transferred from the PC to the "Flash Disk" directory of the SIMATIC

RF310M (also see Data transfer between the PC and reader (Page 88)).
All the files of the "Flash Disk" folder are displayed. You can select the desired file via the

touch screen or by entering the filename under "Name" and <OK>.

9.3.4.3

Save Tag / Save Tag As

The functions are available in the application mode "Mobile" when "Edit Tag" has been

activated in RF-MANAGER.
Via "File > Save", you can save data currently displayed in the editor of the reader to a file on

the SIMATIC RF310M. If you select "Save", the current file will be replaced; if you select

"Save Tag As", you can select a new directory or a new file name.

Summary of Contents for SIMATIC RF310M



















































































































Search results

Summary of Contents for SIMATIC RF310M

Reviews:

Related manuals for SIMATIC RF310M

Brands by name

Popular brands

Siemens SIMATIC RF310M, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC RF310M

Reviews:

Related manuals for SIMATIC RF310M

Brands by name

Popular brands