Siemens SIMATIC RF200, System Manual

Page: 48 / 172

Planning the RF200 system
4.2 Field data of transponders and readers
SIMATIC RF200
48
System Manual, 07/2017, J31069-D0227-U001-A9-7619
4.2.2 Minimum clearances
Minimum distance from transponder to transponder
The specified distances refer to a metal-free environment. For a metallic environment, the
specified minimum distances must be multiplied by a factor of 1.5. The transponders
designed specifically for installation in/on metal are an exception to this.
Table 4- 15 Minimum clearances for transponders
RF210R RF220R RF240R RF260R RF280R
MDS D100 -- -- -- ≥ 240 ≥ 420
MDS D117 ≥ 15 -- -- -- --
MDS D124 ≥ 25 ≥ 40 ≥ 90 ≥ 180 ≥ 360
MDS D126 -- ≥ 50 ≥ 100 ≥ 180 ≥ 400
MDS D127 ≥ 15 -- -- -- --
MDS D139 -- -- -- ≥ 200 ≥ 450
MDS D160 ≥ 20 ≥ 25 ≥ 70 ≥ 150 ≥ 300
MDS D165 -- -- -- ≥ 240 ≥ 500
MDS D200 -- -- -- ≥ 240 ≥ 500
MDS D261 -- -- -- ≥ 200 ≥ 400
MDS D324 ≥ 25 ≥ 40 ≥ 90 ≥ 180 ≥ 360
MDS D339 -- -- -- ≥ 200 ≥ 450
MDS D400 -- -- -- ≥ 240 ≥ 500
MDS D421 ≥ 10 -- -- -- --
MDS D422 ≥ 15 ≥ 20 ≥ 50 -- --
MDS D423 -- -- ≥ 80 ≥ 160 ≥ 250
MDS D424 ≥ 25 ≥ 40 ≥ 90 ≥ 180 ≥ 360
MDS D425 ≥ 20 ≥ 25 ≥ 75 -- ≥ 250
MDS D426 -- ≥ 50 ≥ 90 ≥ 180 ≥ 400
MDS D428 ≥ 25 ≥ 25 ≥ 75 ≥ 150 ≥ 300
MDS D460 ≥ 20 ≥ 25 ≥ 70 ≥ 150 ≥ 300
MDS D521 ≥ 10 -- -- -- --
MDS D522 ≥ 15 ≥ 20 ≥ 50 -- --
MDS D522
Special vari-
ants
≥ 15 ≥ 20 ≥ 5 0 -- --
MDS D524 ≥ 25 ≥ 40 ≥ 90 ≥ 180 ≥ 360
MDS D526 -- ≥ 50 ≥ 90 ≥ 180 ≥ 400
MDS D528 ≥ 25 ≥ 25 ≥ 75 ≥ 150 ≥ 300
All values are in mm, relative to the operating distance (S
a
) between reader and transponder, and
between transponder edge and transponder edge