Siemens SIMATIC RF185C Operating Instructions Manual Download

Page: 7 / 208

SIMATIC RF185C, RF186C, RF188C, RF186CI, RF188CI
Operating Instructions, 04/2020, C79000-G8976-C512-03

Introduction

Purpose of these operating instructions

The information provided in these operating instructions enables you to commission the

SIMATIC RF18xC and RF18xCI communication modules.

Basic knowledge required

These operating instructions assume general knowledge of automation engineering and

identification systems.

Scope of validity of this documentation

These operating instructions are valid for the SIMATIC RF185C, RF186C, RF188C,

RF186CI, and RF188CI communication modules as of product version "01", firmware

version V1.3 and delivery date as of 05/2020.

Trademarks

The following and possibly other names not identified by the registered trademark sign ® are

registered trademarks of Siemens AG:
SIMATIC ®, SIMATIC RF ®, MOBY ®, RF MANAGER ®, SIMATIC Sensors ®

Orientation in the documentation

In addition to these operating instructions, you require the operating instructions for the S7-

300, S7-400, S7-1200 or S7-1500 controller used. When using an S7 controller, you can find

information on programming the module and a complete error description in the description

of the "Ident profile and Ident blocks" function blocks, the RFID standard profile and the

FB 45.
You can find all relevant information for XML configuration and programming in the "XML

Programming for SIMATIC Ident" manual. You can find the information on configuring and

programming over EtherNet/IP in the "Ident profile, Add-on instruction for Rockwell systems"

manual.
You can find information on the readers and optical readers to be connected in the manual of

the respective product family (RF200, RF300, MV400, and MV500).
You can find the current versions of the various manuals on the pages of the Siemens

Industry Online Support (

https://support.industry.siemens.com/cs/ww/en/ps/14970/man

Summary of Contents for SIMATIC RF185C

















































































































































































































Search results

Summary of Contents for SIMATIC RF185C

Reviews:

Related manuals for SIMATIC RF185C

Brands by name

Popular brands

Siemens SIMATIC RF185C, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC RF185C

Reviews:

Related manuals for SIMATIC RF185C

Brands by name

Popular brands