Connecting
5.7 Setting the PROFIBUS DP address
SIMATIC RF166C
Operating Instructions, 12/2019, C79000-G8976-C578-01
47
Connecting up the terminating resistor for PROFIBUS DP
Terminate a PROFIBUS DP segment with its characteristic impedance at its two ends, i.e. at
the first and at the last station of the segment. A terminating resistor is available for this
purpose. It can be screwed onto the unused PROFIBUS interface of the CM.
The following figure shows a typical application for a terminating resistor.
①
PROFIBUS connection
②
Terminating resistor
Figure 5-13 Terminating resistor on RF166C
Summary of Contents for SIMATIC RF166C
Page 6: ...Table of contents SIMATIC RF166C 6 Operating Instructions 12 2019 C79000 G8976 C578 01 ...
Page 20: ...Description 3 3 Design SIMATIC RF166C 20 Operating Instructions 12 2019 C79000 G8976 C578 01 ...
Page 160: ...Dimensional drawings SIMATIC RF166C 160 Operating Instructions 12 2019 C79000 G8976 C578 01 ...
Page 176: ...Service Support SIMATIC RF166C 176 Operating Instructions 12 2019 C79000 G8976 C578 01 ...